Estrifan Additiv PL 936/V
High-Quality Plasticiser-Concentrate for Screeds with Adversely Graded Sand Grading Curve
Product Properties
- “Ball-bearing effect” optimises the workability
- Improves the homogeneity of the screed
- Stabilizes
- Reduces the collection of water on the surface during smoothing
- Good water-retention
Areas of Application
- Homogenous screeds up to EN 13813-CT-C25-F4 and EN 1381-CA-C25-F4
- Heating screeds
- Screeds with sands low in powder
- Screeds with sands rich in powder
Application Notes
Estrifan Additiv PL 936/V is a highly concentrated additive for the manufacture of cement- and anhy- drite-screeds.
Estrifan Additiv PL 936/V improves the workability of screeds with adversely composed grading curves by entraining regular, stable air-pores (ballbearing effect). The insulating effect of these air- pores in heating screeds must be taken into consideration.
The effectiveness of this additive very much depends on the origin and composition of the aggregates, as well as on type and amount of the used binding agent.
Estrifan Additiv PL 936/V is added together with the starter liquid. Overdosing must be avoided, as this might lead to an increased entraining of air- pores. This will reduce the strength of the screed. The optimal dosage is determined in preliminary tests with the corresponding aggregates and cements. In the course of these suitability tests the technical properties and the workability of the screed mortar can be tested. When changing the screed-formulation, the constancy of the screed mortar’s properties when using Estrifan Additiv PL 936/V must be determined in preliminary tests.
When working with this product please note the general processing information in the data sheet “Estrifan — Screed additive”, as well as the safety data sheet for the handling of Estrifan Additiv PL 936/V!
Estrifan Additiv PL 936/V is also available as a powder.
Technical Data for Estrifan Additiv PL 936 V | ||
Characteristic | Unit | Value Comments |
Density | g/cm3 | approx. 1.02 |
Recommended Dosage for Cement Screed | %ml | approx. 0.05-0.1 of the cement-weight, equals approx. 25-50 per 50 kg cement |
Recommended Dosage for Anhydrite Screed | % | approx. 0.02-0.05 of the binder-weight |
Product characteristics for Estrifan Additiv PL 936 V | ||
Internal Quality Control | DIN EN ISO 9001 | |
Colour | green | |
Consistency | liquid | |
Colour Label | blue | |
Form of Delivery | 30 kg canister 200 kg PE-barrel 1.000 kg container | |
Storage | Can be stored for at least 12 months. Keep frost-free! | |
Disposal | For the sake of our environment please empty the packs completely! For this, please refer to our “Disposal Concept for Emptied Transportation-and Sale-packaging”. |
Property specifications are based on laboratory tests and may vary in practical application. To determine the individual technical suitability, preliminary suitability tests should be carried out under the application conditions.
Note: The information on this data sheet is based on our experiences and correct to the best of our knowledge. It is, however, not binding. It has to be adjusted to the individual structure, application purpose and especially to local conditions. Our data refers to the accepted engineering rules, which have to be observed during application. This provided we are liable for the correctness of this data within the scope of our terms and conditions of sale-delivery-and-service. Recommendations of our employees which differ from the data contained in our information sheets are only binding if given in written form. The accepted engineering rules must be observed at all times.
Edition 09/07. Some technical changes have been made to this print medium. Older editions are invalid and may not be used anymore. If a technically revised new edition is issued, this edition becomes invalid.
Estrifan Additiv PL 936/V Pulver
- “Ball-bearing effect” optimises the workability
- Improves the homogeneity of the screed
- Stabilizes
- Easy dosage
- Economical concentrate
- Problem-free storage
- Reduces the collection of water on the surface during smoothing
- Entrains regular, stable air-pores
- Homogenous screeds up to EN 13813-CT-C25-F4 and EN 13813-CA-C25-F4
- Heating screeds
- Screeds with sands low in powder
- Screeds with sands rich in powder
Technical Data for Estrifan Additiv PL 936/V Pulver | ||
Characteristic | Unit Value | Comments |
Density | g/cm3 approx. 0.70 | bulk density |
Recommended Dosage for Cement Screed | % approx. 0.05-0.1 ml approx. 25-50 | of the cement-weight per 50 kg cement |
Recommended Dosage for Anhydrite Screed | % approx. 0.02-0.05 | of the binder-weight |
Product characteristics for Estrifan Additiv PL 936/V Pulver | ||
Internal Quality Control | DIN EN ISO 9001 | |
Colour | light brown | |
Consistency | powdery | |
Colour Label | blue | |
Form of Delivery | 12 kg PE-bucket | |
Storage | Can be stored for at least 12 months. Keep frost-free! | |
Disposal | For the sake of our environment please empty the packs completely! For this, please refer to our “Disposal Concept for Emptied Transportation-and Sale-packaging”. |